33mm and 34mm clip ons

[MarcW]

I have a set of each. Machined for a tight fit, mitered and tiged at joints. 33's were built using a set of old Honda bars so they have the factory holes for internal wiring, although a hole would need to be made to run the wiring out of the bar. 34's are standard bars. Made in the USA.


$60 shipped


PM me for any other sizes, I can have them made to any fork size, bar angle or bar length you may need!!

 

[MarcW]

bump, sold a couple sets of these to some other DTT members. I'm sure they would vouch for the quality.


I need $ for mid ohio!!

 

[bradj]

Im on the fence on a set of 34 you still have any

 

[MarcW]

Yup, still have the 34's in the pic

 

[VonYinzer]

Hey Marc. I could use a set of 34s if theres still some floating around. And, ya folks... I have a set for the 68 CL175 and theyre definitly worth the scratch.

 

[rockcitycafe]

you should cope the bar so it fits at the front of the fork clamp, the way they are, they'll have issues with most master cylinders used on old bikes, nice though

 

[Jake73]

Nice quality

 

[MarcW]

33's sold, there'll be more though

Hey Marc. I could use a set of 34s if theres still some floating around. And, ya folks... I have a set for the 68 CL175 and theyre definitly worth the scratch.

Ya Mike I still have the 34's in the pic. lmk

you should cope the bar so it fits at the front of the fork clamp, the way they are, they'll have issues with most master cylinders used on old bikes, nice though

Killer idea, I'll shoot it by the machinist!!




FYI, buying some more steel soon. Could do stainless for not much more if there's interest, just have to buy the steel.

 

[MarcW]

34mm's sold

I'll post up as soon as I get some more, maybe tomorrow.

 

[VonYinzer]

Ya Marc.

BradJ called me this am. Wanted me to tell you that hes on vacation right now, but when he gets back hes still down for a set of the 34s.

 

[buckeyebike]

I just picked up a clean '73 CL175 last night (only 1100 miles) and I am chomping at the bit to start the build. Figured I better get the parts in order first. What size are the CL175 forks- LOL! I am use to the CB350s.

I'd be interested in a set of stainless for a CL175, '73.

Price shipped to 43082, OH?

Thanks!

 

[MarcW]

I just picked up a clean '73 CL175 last night (only 1100 miles) and I am chomping at the bit to start the build. Figured I better get the parts in order first. What size are the CL175 forks- LOL! I am use to the CB350s.

I'd be interested in a set of stainless for a CL175, '73.

Price shipped to 43082, OH?

Thanks!

Should be 31mm forks.

Flat shipped rate since they go in a padded flat rate envelope.

I should have a set of 31's mid next week.

 

[buckeyebike]

Cool, what is the price for the stainless?