nyc69cb350
New Member
I have a 69 cb350 and I just put the motor back together and into the bike. I gapped the points and have been trying to get the timing done, but my issue is that the left side points won't close. I've tried two sets of points and I am getting the same problem on the left side.
I tried making sure I gapped them properly and did it three or four times.
I tried moving the base plate and still the left side won't close.
Anyine know what might be wrong> I am really stumped and frustrated.
TIA
I tried making sure I gapped them properly and did it three or four times.
I tried moving the base plate and still the left side won't close.
Anyine know what might be wrong> I am really stumped and frustrated.
TIA