redahtamn
Active Member
I have a set of pretty nice cl450 pipes up for grabs. They came on a 450 that I purchased and have no desire to use them. No major dents , dings or wear. They have some minor pitting and some surface rust on the back of the heat shields. I gave them a quick polish but have yet to treat the surface rust on the back of the heat shields. I figured everyone has their own way, so go for it.
I am honestly not quite sure how much a set of these pipes runs so shoot me an offer. I will give it a couple days and them put them up on ebay.
I am at work right now so pictures will be available as of tonight.
Notes:
All the original scews need replaced, it took me hours to get the old screws out to be able to do the quick polish I did on them.
You will need:
7- 6x14mm pan screws
To replace all:
1- 6x22 mm hex bolt
1- 8x28 mm hex bolt
1- 5x8 mm pan screw
7- 6x14 mm pan screw
The original gasket muffler disintegrated long ago, it will need replaced (about $9) part
#18392-MK4-000
Does not include exhaust flanges or exhaust collars
I am honestly not quite sure how much a set of these pipes runs so shoot me an offer. I will give it a couple days and them put them up on ebay.
I am at work right now so pictures will be available as of tonight.
Notes:
All the original scews need replaced, it took me hours to get the old screws out to be able to do the quick polish I did on them.
You will need:
7- 6x14mm pan screws
To replace all:
1- 6x22 mm hex bolt
1- 8x28 mm hex bolt
1- 5x8 mm pan screw
7- 6x14 mm pan screw
The original gasket muffler disintegrated long ago, it will need replaced (about $9) part
#18392-MK4-000
Does not include exhaust flanges or exhaust collars
