'71 Honda CB350 partout

S

snowman88

Been Around the Block
NO LONGER PARTING OUT, due to the fact that this bike is in horrible shape. I will be salvaging what i can and cleaning up/restoring what parts i can later on when i have time.

So as the title says i have a '71 cb350 that i'm parting out, its in rough shape. If you need something, just ask and i'll see if its still there and what kind of shape its in, and i'll try to post pictures of it.

Here's a few things that its MISSING:
fenders
carbs
wiring harness
cables

Also, parts will be CHEAP, unless you want me to clean them up, which i can do, then they will be a little bit more.

I also have a few parts off of a '78 CB550:
both fenders
some turn signals
headlight ears
 
No title for the frame, sorry. But i could go down to the DMV to see what i would need to do to get one for it. How much would you pay if i could get one?

As for the seat, the foam and cover are in horrible shape, but the seat pan seems to be in pretty good shape, just some surface rust. I do have access to a media blaster if you want me to clean it up. The rubbers for the ears look like they are in decent shape, i can pull them off tonight if you want me too.

The tank is in horrible shape, it has a few dents but there is a bunch of crap in it.
 
Molerat: How about $5 shipped?

go!: I do, they are in horrible shape, one is partly destroyed, and the other would have to be rebuilt. If you still want them, they are yours for the price of shipping. I do have the clutch side controls off of a CB550 that work.
 
Do you still have the tachometer, if so is it in real good shape ( i.e. clear face and the light markers work), I don't need the cable. also do you have the front tire rim, needs to be straight hopefully no rust. let me know. -P-
 
@ pacaguy: Yes i have the tach, its in pretty rough shape though. The face plate is faded, the black housing has paint chipping off with a few rust spots, and the cable inlet is loose causing the needle to be loose, and i don't know yet if the lights work. I also have the front rim, but its in similar shape. Its got some rust, the axle or brake is seized, and i don't know if its straight.
 
Snowman88, thanks for checking I think I'll have to pass on both, really need a tach in good shape. The rim that I currently have sounds to be in about the same shape as the one I currently have. thank you for checking. -P-
 
paca, yup no problem.

partydog, yup, sorry no carbs, my friend who sold this to me needed them for his other 350.
 
What about the bars and controls? Are these the bars that run the wires through the controls? Some pics maybe?
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom