72 CB750 - Replacing right handlebar control - need wiring help.

[colab]

I took my old gummed up handlebar control with the HI/LO beams, starter button and kill switch off last year. I made a video so I could get all the wires back in the right spots... but i lost the video. Does anyone have any advice or an accurate diagram? The bike is stuck in my garage till I figure this out.

 

[Sonreir]

Kill switch will be the black and black/white wires. High and low should be white for low, blue for high, and blue/white for input. Depending on your year, this blue/white input may be black, or black/yellow instead. There is sometimes a brown or brown/white wire for the gauge backlights, too. Starter button will be the yellow/red wire.

 

[colab]

Thank you. I'm going to give it a go after work. Fingers crossed.

 

[Powderfinger]

Check out this interactive wiring diagram. You can view or eliminate what you want. This is for a K1 though.

Very cool diagram this fellow made.

http://oldmanhonda.com/MC/wiring750K1.html

 

[frankxedge]

Yea wiring diagrams are your best friend.