'74 cb450 quick question

[wesley1521]

so i have a cb450 and was wanting to do stainless steel braided front brake lines. i have taken out the front brake switch so it would just be one banjo fitting going into the hard line that is attached to the caliper. i assume it has to be custom made but can anyone point me in the right direction please? any help would be greatly appreciated. if the whole braided brake lines is too expensive or just not possible where would be a good place to get some stock ones? if i went back to the stock rubber ones then i would put the brake switch back on....
thanks

 

[joevirus563]

so i have a cb450 and was wanting to do stainless steel braided front brake lines. i have taken out the front brake switch so it would just be one banjo fitting going into the hard line that is attached to the caliper. i assume it has to be custom made but can anyone point me in the right direction please? any help would be greatly appreciated. if the whole braided brake lines is too expensive or just not possible where would be a good place to get some stock ones? if i went back to the stock rubber ones then i would put the brake switch back on....
thanks

Hey,

I know someone: Contact him: http://www.slingshot-cycles.com/ or see post: http://www.caferacer.net/forum/topic.asp?TOPIC_ID=8828

He can have custom maded one again in different color! enter "caferacer" on there website and get 15% off.

 

[wesley1521]

awesome....thank you so much....i have been looking for quite sometime around at different shops and they all said it would be pretty difficult to find the stainless steel braided lines.....ill definantly be buying some here shortly