born2expire
let's talk shop
im following the steps in the honda manual to get the carbs right and to get them synced. bike fires up and i can get it to the 1,200 rpm at idle to try and find the right point for each carb but it will randomly die sometime before i start to sync the carb or during. i have vacuum gauges and it just looks screwy and not like crazypj video. im at a lost. i've had this bike for three years and today i about kicked this thing down the driveway, its summer and i want to ride this sum bitch!
when i get off work monday im going to go through the carbs one more time (check everything) also the right cylinder is running way hotter then the left cylinder (right at 210 left at 150ish at idle
fresh top end, new cam chain, lapped valves, valves have been checked.
i'm also going to check the timing one more time but i'm big on figuring things out for myself but i need some help. the best would be in person!
when i get off work monday im going to go through the carbs one more time (check everything) also the right cylinder is running way hotter then the left cylinder (right at 210 left at 150ish at idle
fresh top end, new cam chain, lapped valves, valves have been checked.
i'm also going to check the timing one more time but i'm big on figuring things out for myself but i need some help. the best would be in person!
