76 cb400f

[TonPusher100+]

Help,

I want to have a kick start only on the cb400f cafe racer, but what should i put in the hole in the block where the starter goes in? Is there a plug that is manufactured to fill the hole?

Thanks fellow riders

 

[coalnation]

This should fit your bike.

http://www.ebay.com/itm/Honda-CB250-CB350-Cappellini-54-crank-case-plug-when-starter-motor-is-removed-/161059320018?pt=Motorcycles_Parts_Accessories&hash=item257fe230d2&vxp=mtr

 

[1sttimer]

PM crazypj. He makes start block off plug. I just got mine in the mail a week or so ago and it works like a dream. Comes with a seal and everything. He charges 35 with shipping.

 

[SONICJK]

This should fit your bike.

http://www.ebay.com/itm/Honda-CB250-CB350-Cappellini-54-crank-case-plug-when-starter-motor-is-removed-/161059320018?pt=Motorcycles_Parts_Accessories&hash=item257fe230d2&vxp=mtr

Are you sure?
the 400f is a completely different design as far as where the starter mounts.
Its possible the holes are the same size however....

 

[fresh_c]

Why wouldn't you just measure the hole in your engine, then ask what size the plug is?

 

[TonPusher100+]

TRICKY TRICKY. I will have to do a little measuring and searching I guess. I could always leave the starter in for now till i find the right plug or make one. Seems to be the problem with the cb400f ss. Theres nothing to anchor the plug to without drilling the case.

Also contacted Crazypj -- he wasnt yet able to figure one out yet either do to lack of securing capabilities.


Thanks for the thoughts and directions.

Great Team!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

 

[kyre]

Rick Denoon will hook you up - http://www.denoonsp.com/

I've got one and it works well. He makes all kinds of nice 400f parts.

You do have to drill the case so if that's a problem for you then it won't work.