76 cb750f part out

[superchomper2003]

Hi all, have a 76 cb750f t parts bike that I am starting to part out. I purchased the bike as is for parts but ended up only needing the fuel tank. So other than that everything is there. The story from the previous owner is that it was running fine up till 10 years ago and he let his son ride it and he threw a rod through the bottom of the engine and he hasn't done a thing to it since except put it outside in the weather about 5 years ago. Now the front bottom of the motor does have a hole with a piece of a rod hanging out so I am inclined to believe his story. I squeezed the front master cyl and the handle did pull in but then stayed that way and the same for the rear. I will keep a list here of the thinks already sold so that you will know what I still have. PM me an offer for any thing or if you ask I will give you a price. Thanks!

Parts Sold:
Fuel Tank
Bike side covers
Complete engine top end except for the valve cover
Rear wheel with Caliper and Sprocket
Rear brake Leaver

 

[michael_brown]

Good side covers? If so I'd take them.

 

[superchomper2003]

Sorry but side covers are gone. Thanks

 

[speedwobble]

What levers are on it? I need a clutch lever to match this old guy...

 

[bjonesin]

I would like the finned cover on the left side.

Sent from my DROIDX using Tapatalk 2

 

[superchomper2003]

Speedwobble the ones that I have look a bit different than that. They are just smooth. Bjonesin you have a pm. Thanks

 

[thecoy]

i could use the whole back brake setup. plate lever master hose caliper whole shabang.

 

[surffly]

Interested in
-Finned dyno cover (left)
-Finned Clutch cover (right)
-Carbs with rubbers

 

[MB]

I wanna see a picture of the rod sticking out

 

[Redbird]

What condition is the oil pressure gauge in? And how much?

 

[bananaclip]

Let me know if you have the front suspension.

 

[78HawkII]

Do you have the seat cowl? can you take a pic and how much?
Thank you.

 

[BuffaloBill]

Would you have any or all of the front brake parts? I'd like the rotor, caliper, caliper mounting braket & bolts * spring, etc, and disk guard.

Thanks, Bill

 

[livetoskate]

Do you have the regulator, rectifier, and solenoid?

I am interested.
Thanks

 

[michael_brown]

What shape is the fuse box in?

 

[MarcW]

Interested in the front calipers and master if available please post a pic!