77 KZ200 Lucky 7's Alberta Tracker

[Oil Cooker Designs]

Ya, I made the seat for my cm400 so I will make another. Here is a rough drawing of a thumb controlled paddle shifter. I know I have to increase the space on the spring side so the lever arms dont hit the case. Have to figure out the measurements then build one and test it out.

 

[Oil Cooker Designs]

And here is a quick sketch on how I want her to look, Some of the mods will include
Larger rear shocks
Larger aggressive tires
Custom aluminum seat pan
Front rack
Rear rack
Rubber fork boots
Twin headlights
Custom handle bar paddle shifter
Tail light and blinkers (tucked in under rear rack)
Hidden wiring harness
Air pod
I think I got it all...

 

[du_hanh91]

Hello. I am Dat. I am from Viet Nam. I am 24. Can you help me about some problems?
Can you help me how to make the bike in the direction parallel to the ground as the two shown below

 

[Oil Cooker Designs]

Hi, Dat. I guess I just got lucky with my kz200. The way I would level my bike would be by lowering the front end,by loosening the fork tube bolts and sliding the forks up a little at a time. The other would be trying out some different size shocks on the back end. I hope that helps.

 

[Oil Cooker Designs]

Hello, Dat do you have any pictures of your bike and how it is sitting?

 

[Oil Cooker Designs]

Took the long weekend off of building and went gold hunting all weekend. I found some flour gold and while I was out there, made a few handle bar end caps. I pretty sure I seen them on this site and liked them so I had to get some myself. They were 1oz slugs, lol

 

[Oil Cooker Designs]

Its raining here so its time to start ordering some parts....

 

[BoJordan]

dude, im loving some of your unconventional ideas! The theme for my xl250s is going to be military and I was thinking about some sort of gun rack and ammo box mounts, I won't steal your ideas like mounting the handlebars differently, but cheers for broadening the horizon.

 

[du_hanh91]

My bike is Honda LA 250

I want to build my bike to tracker

 

[Oil Cooker Designs]

Wow, that is a really nice and clean bike, cant wait to see what you do with it.

 

[pesmrealistic]

WawawaY cool direction to the build. I was looking through my grandpas Indian motorcycle book and ever since then I have had a growing sweet spot trackers. very cool ideas, keep it up.

 

[bobhobly]

Very nice to see.Kawasakis don't seem to be the more popular bikes to do.I am doing a 78 kl 250.Swapped out the front end for a 87 tw 200 so i could get a more balanced look.redid triple trees and she came out pretty good so far.pics on here under kl 250 progress.can't wait to see this done. Have fun. Bob