Adjustable steering stop

[CatDad]

I drilled and taped my steering stops so my clipons wont hit the tank. I've seen people suggest this method but never a photo so I thought I would share. This is on a cb450. Filed the stop down slightly to get a flat surface, punched, drilled pilot hole. I'm using a 4mm screw and the bit was standard but something like 3.44 mm.

 

[settintrendz]

Pretty slick!

 

[pacomotorstuff]

Put a nut between the bolt head and the lower crown and tighten it against the crown. It will act as a "jam" nut and the adjustment will stay fixed.
Pat