Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Three new unknown name brand K&N style air pod filters. The pods have an inside diameter of 40mm(1.5") $20 (only need two, you can have two for 20 and get an extra for free)
Also have some homemade rearsets I picked up last year I never used. They are just the brake and shift levers and rod for the shifter. No pegs. $20
Two Emgo style brand new reverse megaphones. One is missing a clamp. Inside diameter is 43mm(1.72") $75
Emgo rotor lock & key. I used it on my CM400 when I ditch the key and just ran a toggle switch. $10
Re: air filters, rearsets, reverse megaphones, clipons, manx seat
Their nothing fancy but do have dual ball bearings in each lever. Just need to make a plate to mount them up. Nothing too tough. It also has rod and mount to attach to the shift rod on the engine.
Umm, never had it on my CM400 but I still do have the frame and I try it out on if you want. Pods I don't know either but I can try them out. The pods came with my GT550 but I wasn't going to use them. I've got some aluminum velocity stacks that are currently on my CM400 engine. Really nice NOS Koto units I got from Sweden.
Umm, never had it on my CM400 but I still do have the frame and I try it out on if you want. Pods I don't know either but I can try them out. The pods came with my GT550 but I wasn't going to use them. I've got some aluminum velocity stacks that are currently on my CM400 engine. Really nice NOS Koto units I got from Sweden.
are you recommending the velocity stacks instead of the pods‽ cuz i have been checking out both. i just compared the measurements of your seat with what i had measured on my frame, and it seems like it might work. where would these parts be shipping from?
Got a diameter on the martini mufflers? Depending on cash flow coming in I might like those or the megaphones. I've got megaphones on now but they are in bad shape. Shipping (hopefully) wouldnt be much over to Eau Claire.
The cocktail shakers sold just this past week. Sorry for not updating the thread. The reverse megs are still here. These are in perfect condition. Their just a little dusty from sitting in the garage but their brand spankin' new. The shipping will be 10 bucks as I just shipped the cocktail shakers to IL and they ran me 12.
will the seat and clip ons fit a 69 cb350? if so what will shipping cost to california 95035?
fiberglass Manx style seat pan. Measures measures 540mm long 260mm at widest and 235mm at narrowest.
looks exactly like this but has a white gelcoat on it and has five 1/4" holes drilled into seat section when I tried mounting it up to my frame. $60
33mm clip ons basically brand new. Just mounted but nothing else beyond that. $60
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
