Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
It looks like he starts them at about the equiv of $1.
It would be worth talking to a german firend and having him better translate. It says he ships worldwide. I'd be interested. They look like nice quality.
Wonderful, one of a kind; and not available in stores!!! Marvelously suitably for beautiful cafe a Racer change. We offer here a pre--polished aluminum hand made item. The metal has a thickness of 2 mm. I believe everyone who has expertise on hand made metalwork, can atess to the amount of labour put into it. If you have any questions or orders when looking at the measurments, I ask to contact you me at the phollowing nunber 0176-23815983 (regular phone, not internet). The seat will look good with an aluminum tank. If the seat face needs to be shorter (depending upon tank), then I can shorten the seat pan. The seat should fit most bikes (as seen in the pictures) on the framework of a CB 550 and the Tonti frame of the large Guzzi of models and on many other classical motorcycle models. Laverda, Honda CB, BSA, triumph or other Caferacer changes should look good as well, and of course on other motorcycles such as Ducati. So, now roughly measure your bike and make me an offer!!! You'll love it. Search for: Guzzi Ducati Laverda Honda BSA AJS triumph Enfield Norton aluminum tank aluminum tank aluminum peak Yamaha SR 500 XS 650 cafe Racer, Giuliari, Rickman Van Veen, Old Style, Bobber, Harley Davidson. Shipping expenses to Italy, Spain etc. amount is 20 euros, and Switzerland 32 euros. A picture shows the seat in the "original state" 18 a tariff fender (fender) blank is set beside. We offer here on a UNIKAT!
I've watched his auctions from time to time - keeps on making and selling them. I considered one for my project bike, but ended up going more traditional for now. Might go this route in the future - they sure look nice.
So I just saw this post and figured I'd send this dude an email. I asked about a seat for a cb550 and he replied in German.
"Hallo, wenn Sie mir die Maße angeben kann ich Ihnen einen Höcker für eine cb 550 anfertigen. Der Preis liegt bei 169 Euro incl. Versandkosten.
Gruß Markus Marburger"
I went to a free translation website and converted it:
Hello, if you me the mass indicate can I you a hump for a cb 550 prepare. The price is about 169 Euro incl. Shipping charges. Greeting Markus Marburger.
169 euro is $262 CDN
Thats not too bad a price for a hand made seat that would last the test of time.
Well, $260 isn't exactly 'cheap' I wouldn't say. These are pretty simple forms for an experienced metal worker with the right equipment. He probably knocks these out in an hour or two tops (just a guess of course, as I'm not an experienced metal worker).
You also need to ship it over from Germany or whereever. That will run you another $50 I'd say at least.
Well, $260 isn't exactly 'cheap' I wouldn't say. These are pretty simple forms for an experienced metal worker with the right equipment. He probably knocks these out in an hour or two tops (just a guess of course, as I'm not an experienced metal worker).
You also need to ship it over from Germany or whereever. That will run you another $50 I'd say at least.
My dad is a metal worker. I'll show him these and see if he can make some for the guys that want one. it would be cheaper and just from ohio. buuuuut if you're to far south i might need a translator ;D
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
;D
