Anyone know where I can get braided brake lines for my cb350?

[m511y]

I can't find a replacement for my torn OEM front upper brake tube. If I can find a reasonably priced braided line, I might as well upgrade. Any ideas? So far the only set I have been able to find are from slingshot cycles for $60. I know that isn't a lot of money, but for some reason I think I can find them for less.

http://slingshot-cycles.com/index.php?main_page=product_info&cPath=1_8&products_id=22&zenid=bf516c20b9a0355055380f47dc92c3a2

I was also able to find some from z1 enterprises, but you have to peace them together and I haven't had time to research exactly what length and fittings I need.

http://www.z1enterprises.com/catalog.aspx?pid=CB350G-1973-WB1

 

[glen@fsmotorcycle]

Have a look in your local phone book for a company that does hydraulic lines / hoses. Bring them your old line and they should be able to copy for cheap If your in Toronto Rocket cycle used to have all the fittings and bulk line you can try giving him a call

Cheers

 

[joevirus563]

I can't find a replacement for my torn OEM front upper brake tube. If I can find a reasonably priced braided line, I might as well upgrade. Any ideas? So far the only set I have been able to find are from slingshot cycles for $60. I know that isn't a lot of money, but for some reason I think I can find them for less.

http://slingshot-cycles.com/index.php?main_page=product_info&cPath=1_8&products_id=22&zenid=bf516c20b9a0355055380f47dc92c3a2

I was also able to find some from z1 enterprises, but you have to peace them together and I haven't had time to research exactly what length and fittings I need.

http://www.z1enterprises.com/catalog.aspx?pid=CB350G-1973-WB1


This is the price... really

 

[crazypj]

Take a look over at SOHC4.net, because of the hard line to caliper you need a different fitting.
I can't tell you anything about fittings as I make my own lines and modify caliper.

PJ

 

[HerrDeacon]

I was also able to find some from z1 enterprises, but you have to peace them together and I haven't had time to research exactly what length and fittings I need.

http://www.z1enterprises.com/catalog.aspx?pid=CB350G-1973-WB1

I got mine from z1 Enterprises, very nice, not too expensive either.

 

[tjjkc]

sales@rennsportautoparts.com


These guys are in Scarborough...........I just got a front line for a 78 400T..$30 shipped in Ontario

different colours,they will make standard lengths or custom lengths

I have not used it or put it on yet so I can't say good or bad..............

 

[overdraft]

these guys have reasonable prices and the poduct is good!

http://cgi.ebay.com/ebaymotors/BANSHEE-CUSTOM-STAINLESS-STEEL-BRAIDED-BRAKE-LINE-HOSE-_W0QQcmdZViewItemQQhashZitem414eac27b4QQitemZ280492779444QQptZMotorcyclesQ5fPartsQ5fAccessories

 

[rizzlo34]

Not trying to hijack your thread, but I was wondering what modifications PJ makes to the caliper so that you can use a full flex line all the way down? Any help is appreciated. Thanks.