Anyone tried this?

[ridesolo]

I loved mine. I've since used the Danmoto Nano on a couple of builds, too.
On the Radian, it came from the factory with an electronic tach so I just wired up the Danmoto and it worked perfectly; no resistors or anything needed on that bike.
They're easy to see in daylight and at night. The wiring is VERY close to factory Honda wiring and easy to understand for use on other bikes.
For the money, you can't beat Danmoto.

If you have bought a total of three of the things they must not be bad. Thanx for the word... now all I have to do is talk myself into turning lose of some cash; always a difficult thing to do!

 

[scott s]

They're just about the least expensive digital dash you can buy.

 

[Sonreir]

Sonreir, I grabbed the mount kit for one of these for a steal... I have the Dyna S ignition. Any mods needed to run the Vapor?

Nope. You need to mount a magnet and pickup on the front rotor and do a bit of wiring.

 

[MattL9]

I loved mine. I've since used the Danmoto Nano on a couple of builds, too.
On the Radian, it came from the factory with an electronic tach so I just wired up the Danmoto and it worked perfectly; no resistors or anything needed on that bike.
They're easy to see in daylight and at night. The wiring is VERY close to factory Honda wiring and easy to understand for use on other bikes.
For the money, you can't beat Danmoto.

Think this would work on an old gn400?

 

[scott s]

It can be made to work on anything, I suppose.

On my CB550 and CB650, I had to add a resistor or whatever you call it to "quieten down" the signal from the coils to the tach function.
On the Radian, which came from the factory with an electronic tach, it wired right up with no resistors, etc.