Blinkers on the Cheap.

Ah, I must be overlooking that post. I see the one where I mentioned that I bought incandescent lights by mistake, but would fit LED's at a later time. But I don't see the one where you mention which ones you bought.
The problem you're describing sounds exactly like what LED's do with a analog flasher. But apparently that's not the case.
Which bike are we talking about? You only mention "Harley" and "Cafe"
 
I use these guys...
SuperbrightLEDs.com
If you scroll down the page you'll see "Electronic LED Flashers", click on the little side picture for "Motorcycle Flashers". I used the LF1-S-PIN because the bike already had bullet connectors, but the others have flat blade connectors and no connectors at all.
$8.95 +shipping ;)
 
Redbird said:
..........The problem you're describing sounds exactly like what LED's do with a analog flasher. But apparently that's not the case.......
Click to expand...

More than likely the same problem - that the new bulbs are lower wattage and not drawing enough current to activate the standard blinker unit. Changing the bulbs to 12v21w or getting a no-load (ie LED) blinker unit should cure this.
 
stewiefied said:
thanks buddy
Click to expand...
No problem :)
Keep in mind though, the digital flasher only work in one direction. If you hook it up and it doesn't flash... swap the wires;)
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom