Brake Hose needed

[hecklejk]

Hey guys, does anyone have a upper brake hose (the one the bolts to the Master Cylinder) for a honda CB360 laying around?? I finally got my Mastercylinder rebuild and realized that part of the problem was a clogged Slave cylinder and glooped up brake line... I am pretty sure the lower hoses are clean, but the upper one is definatly stopping brake fluid from getting to the Slave cylinder... If someone has one they could part with that would be awesome, if not can someone point me in the right direction to get new ones...

Thanks,
Kevin

 

[Aetsh]

Take your old line to about any shop ( support locally owned guys!!) and they will be able to make you a new one to the exact size or shorter if need be for pretty cheap!

I'd say that's your best bet, rather than putting soneones old used line on, also check eBay, alot of times you can find new old stock Honda parts for reallllllllly cheap!

 

[Erch]

I'd personally just replace them with new braided lines unless you're going for a restore. Either have a shop cut them to length (might be slightly harder finding a shop that still does custom brake lines), or have your local parts store order you some generic lengths from their catalogue with the specific banjo connectors you want. It's a simple thread in and the end so you don't have to crimp or anything.

 

[Uncle Ernie]

Almost every shop in the country has a Parts Unlimited and Rocky Tucker (Tucker Rocky?) catalogure. You can order all kinds of things.

 

[Kanticoy]

might just have a brand new one in the package at home. I'll look tomorrow.

 

[hecklejk]

might just have a brand new one in the package at home. I'll look tomorrow.

That would kick ass!!! let me know, thanks!