Cafe seat hoops/loops FOR SALE!! $50 +free shipping to USA addresses
- Thread starter cafegoose
- Start date
timberwolffxdl
Been Around the Block
What's your lead time like right now?
timberwolffxdl
Been Around the Block
I'm looking for something a little more custom if you can do it. Two folks have said they could, but one is out of town for a week or so, the other has some weather related issues going on and can't get to it for a week either.
Think you could do something like this? I dimensioned it all out to give some ideas, but the only ones that are important really are the 10.75 and 8.75. The 7.01 is just how it ended up when I dimensioned it out in CAD, and isn't anything set. I just need around 8" total length before it goes to the narrower width.
I understand the 180° section would likely have a flat section, and that's no problem. I also understand the S curve probably couldn't be quite that close together. Also no real problem as long as the legs at the 10.75" width section are about 8", I'm somewhat flexible on the rest.
Think you could do something like this? I dimensioned it all out to give some ideas, but the only ones that are important really are the 10.75 and 8.75. The 7.01 is just how it ended up when I dimensioned it out in CAD, and isn't anything set. I just need around 8" total length before it goes to the narrower width.
I understand the 180° section would likely have a flat section, and that's no problem. I also understand the S curve probably couldn't be quite that close together. Also no real problem as long as the legs at the 10.75" width section are about 8", I'm somewhat flexible on the rest.
I think I can do this but I will have to mess around at the shop tomorrow to see if I can get the dimensions right. How long is the loop section supposed to be after the "s" section? I will give it a shot tomorrow and send you a picture of the finished product if you want to message me your email address. Considering the extra amount of custom work to get this right, the price would be more than the standard $50. If you are interested in me going forward, send me a private message and we can discuss further. Thanks.
carlosreynolds
New Member
PM has been sent.
I currently don't have any 10 degree lift loops made. I don't keep those in stock usually but can be made if necessary. However, I don't think that 10 degrees would really even be noticeable vs. a flat loop since it is so slight. Just my opinion. Let me know, thanks.
Can you make a custom one? I realize this would be more than the quoted pricing. Essentially what I would like is a longer-legged version of your flat hoop and it also be bent 190-200 degrees instead of 180 (essentially making a teardrop where the ends of the legs are closer together than the legs at the bend.
All measurements are in inches
5 1/4" center to center at the end of the leg
7" center to center at the bend
16" long legs (prior to any bend)
shipped to 08540
All measurements are in inches
5 1/4" center to center at the end of the leg
7" center to center at the bend
16" long legs (prior to any bend)
shipped to 08540
