CB 360 Battery Relocation for Pod Filters

[motormayhem]

I know Pods are not really the way to go, but since I had no air filters with my bike I figured they were better than nothing for a close to nothing price….at least till I get everything else on the bike sorted out.
In order to fit them I re-did my battery box to mount the battery sideways and install from the side vs under the seat. I've seen a lot of people convert to a small battery to fit filters so I thought I would share to show a larger battery capable of running the elec start can be made to fit with pods. I also didn't need to lengthen any cables or anything…all stock wires.

Writeup:
http://www.motormayhem.net/2014/02/10/honda-cb-360-battery-relocation-for-pod-filters/trackback/

 

[beerob81]

I did something similar. I cut out the stock box, cut off and ground down the tabs and mounted my battery slightly tilted back on the angled pieces with two pieces of aluminum angled rods. No big problems, running pods, waiting on my Charlies ignition to get in today

 

[motormayhem]

Nice

 

[crazypj]

I use an 8A/hr mounted from toolbox mounts.