cb200 Gas tank on a cb750-doable?

Kev Nemo

Honda Hacker
So I just one a pretty cherry cb200 tank with the sweet strappy thing down the middle on the bay:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170331916779

how much work to make this thing fit the 750? I'm going to make it work it; just wondering what I got myself into! ;D
 
Hi Kev Nemo,

I'm looking at doing the same thing and I'm curious if you actually made it happen after all? Thanks!
 
Going to suck bad to fit. Probably going to need a new tunnel. Problem is the factory tunnel on the 200 tank is super narrow, and the cb750 frame is triangulated on the top with three tubes and is very wide. You're in for some work.
 
Thanks a lot guys for quick replies! One more question though - do you think it would fit if I cut the triangle off and solve the frame some other way, or is the channel still going to be too narrow? Thanks! Mika
 
Cutting the strength out of the frame to fit a tank that will look slightly out of place is probably not the best idea.
 
I think I'm doing this! Going to raise up the front end of the tank a bit. My bike is kinda brat/bobbed out so it'll fit the look i'm going for (hopefully). Did you end up working anything out on your bike?
 
teazer said:
Cutting the strength out of the frame to fit a tank that will look slightly out of place is probably not the best idea.

You have no sense of adventure, Teazer.
 
With that small a tank, he won't be riding far anyway....Gas station to gas station... It will be like a Sportster with the Peanut Tank....
 
This is it mocked up. I was actually surprised at how easily it fit. The frame is not too wide at all.
 

Attachments

  • image.jpg
    image.jpg
    169.6 KB · Views: 1,213
Rich Ard said:
If you scare your seat does it turn into a basketball?

OMF!! I keep going back and forth from your comment and that seat AND I just can't stop laughing!!

Dude You made my day!
 
Re: Re: cb200 Gas tank on a cb750-doable?

work9to5 said:
This is it mocked up. I was actually surprised at how easily it fit. The frame is not too wide at all.

That's because that's not a 750. That's a 500/550 with the stamped spine. The OP asked about a cb750. Totally different frame.

Sent from my DROID RAZR using Tapatalk
 
Back
Top Bottom