cb350 jet O-rings

[Curbcast]

Must I replace? Im cleaning up my (hopeful) daily before the spring thaw.


Main 105
Idle 68


They have rotten rings.


Where to get?


Thanks

 

[loudest143]

http://www.harborfreight.com/225-piece-metric-nitrile-o-ring-assortment-67609.html


I used these on a ton of places on my GS850. Dunno if you'll have similar luck, but at less than 10 bucks, you could do alot worse. I do know that the nitrile rings are the right type of rubber o-ring.


Hope this helps.

 

[Curbcast]

Thanks. Im now thinking Im not missing any rings. As there is a clip that slides into the opposing slot. The ones that are there though are tres rotten.



Im gonna go ring shopping! Thanks

 

[FunJimmy]

The Main Jet O-Ring is a 1.2mm cross-section x 3.5 mm ID.
I found mine at an industrial seal and o-ring vendor.

Check the yellow pages under hydraulic seals etc.

 

[DrJ]

Honda still has OEM o-ring sets.

 

[Curbcast]

I found some fits local, but they arent perfect. Also they are not fuel rated.


Pics are just for fun I geuss, cause Im gonna scrap the idea & get new ones.


http://www.jetsrus.com/a_jet_kit_street/honda_350_CB350K-G_1968-1973.htm


quick fuckin round. Anyone bought from these guys?