Cb360 Magneto Puller

[fiedler.casey]

Alright, I need to get to the starter clutch to remove it (getting rid of the electric start) on my CB360. Will any 16mm flywheel puller do the job? The one here from Bike Bandit is nice and cheap and my understanding is that the magneto (behind which sits the starter clutch) is removed with a 16mm 1.5 pitch tool.

Right? Wrong?

Thanks for the help.

http://www.bikebandit.com/motion-pro-magneto-flywheel-puller-16mm-x-1-5-left-hand?WT.mc_id=googlemerchantfeed&utm_source=feed&utm_medium=merchantfeed&utm_campaign=pla&gclid=CLil9qqKrbcCFQSZ4AodJkYAOw

 

[Rich Ard]

I believe you can use your rear axle

 

[fiedler.casey]

Any idea on how that actually works?

 

[Sonreir]

Yup. The inside of the rotor is threaded. As you screw in the rear axle, it begins to push against the end of the crankshaft and forces the rotor off of the end.

 

[fiedler.casey]

Thank you all for this tip. Very helpful!

 

[Rich Ard]

Re: Re: Cb360 Magneto Puller

Thank you all for this tip. Very helpful!

I forgot to slip a smartass remark in, must be losing my edge

 

[mydlyfkryzis]

Re: Re: Cb360 Magneto Puller

I forgot to slip a smartass remark in, must be losing my edge

Nah, maybe just your battery is discharged... 8)

 

[Rich Ard]

Re: Re: Re: Cb360 Magneto Puller

Nah, maybe just your battery is discharged... 8)

You win this round Honda

 

[fiedler.casey]

Would one of you be so kind as to tell me if I removed everything properly? I pulled the clutch and the sprocket, so now I just need to put the rotor back on the crankshaft? See pictures.

I am trying to get it all set to run without the starter motor.