Solenoid is brand new. I had a brand new one, so I bought another just for giggles to see. So with two brand new solenoids I still don't get anything.
Unless BOTH solenoid to starter cables I have are bad....
Because it has power going to the solenoid, it clicks (1 single time) when start button is pressed.
The starter works off of a battery.
Which means power isn't getting to the solenoid, but according to it clicking that isn't true.
So power isn't getting to the starter... and the only thing left to rule out is the cable?
Right??..
In theory, as long as it is connected to the frame I can ground anywhere I want to correct? Is there a place that is best.
I haven't checked the fuse. But I am assuming if the fuse was blown, then no power would get anywhere correct?
I mentioned this before, and I don't believe it is affecting anything. But the neutral ground wire is no longer connected because I don't have a neutral light anymore. I know it ran through the wire coming from the alternator there to the connector going in the battery box. Would this mess anything up?