Update:
Just for fun, I took the carbs off and opened them up and made sure all jets were clean.
Then I did what sonreir suggested and checked the timing advance. Now what is strange about this is, when the clamp is over the left plug wire the timing light does not fire. rev the engine, timing light is not firing nor is it advancing (obviously).
Put the clamp over the right plug wire, timing is dead on, timing advance is perfect. The light works.
What makes this super weird, is the left exhaust pipe gets hot immediately and the exhaust coming out of it is hot which indicates to me that it is in fact firing. And when I pull the plug, and check to see if the plug arcs against the engine it does, and when I checked the static timing it is spot on there. Does this make sense? Any ideas? Condenser not working correctly?
But.. the right side exhaust pipe takes forever to warm up, and the exhaust coming out is cold. Is this just because it is running rich?