Re: CB360's - 1974 & 1975 - Hear No Evil & Speak No Evil- yep, there's two of them
Speedo is mounted and working, had to fabricate a multi-piece bracket (amazing how difficult it is to spin wheel more than 10MPH ;D )
Footrests on, had to make various spacers.
Made a new brake pedal, don't like it but I'll keep it for now (made a second one, liked it even less
)
Cut down original brake pedal, removed foot lever part and kept pivot/operating arm/rod then welded 'pull' piece to bottom.
I was going to make a completely new section but it's taking too long and I want it running.
still need to make linkage for brake and gearchange.
Swapped wires on 'dash' LED's for thinner ones
Doing everybodies 'favorite' job - wiring it up
It would be a lot easier if I hadn't fitted LEDs all over the place and didn't want to try to stick close to 'stock' wiring colours (indicators are 'correct', live, switched live, ignition and ground leads, correct colours)
Cat thinks it's great though, all that stuff to play with
Shock is off so it's easy to compress suspension and get bolts through passenger footrest mounting holes
So far,every time I touch anything, I HAVE to modify it :
Almost forgot, I painted a few pieces as well 8)
Anyway, here's a pic.
Stuff you need.
Butane soldering iron, two different crimping pliers, solder, heat shrink tubing, lots of different wires