Re: CB360 Hear No Evil & Speak No Evil- New pics -sorta finished one
Hi swagger, still mostly numb but occupational therapy, ultra sound and massage are helping with scarring.
Things are loosening up a bit still really weak though :'(
Started putting the third CB378 motor together.
This one is probably going to end up more 'trackerish'
Haven't cleaned and painted head yet, going to clean up ports , valve job, and oil system mod.
Not sure if I'll make a right side high level pipe set, same/similar to 390 I have in Britain?
Here's pic of cylinder fitted and one of left piston.
Block has been skimmed, I forget how much though :
Will get piston to TDC tomorrow and measure where crown is then see if head needs skimming (or not ;D )
Managed to loose copper head gasket, I've put it too safe this time
Yes, that is a bit of 'dirt' at 11:00 o'clock position, picture shows stuff that's easy to miss.
I'll clean it out before head is fitted
I'm going to modify sprocket cover, same/similar to 'cafe' one
Probably going to paint outer covers and head/rockerbox metallic light blue, if I can find it in high temp paint (Pontiac colour?)
Clutch and clutch covers are going to be modified on all motors, plus gun drilled cam /external oil lines