brian weir
Been Around the Block
Hi guys,
see what you can find in these pics listed below in the thumbnails.
anybody wants to know about the amount of stuff, ask jack cooc and marco who bought the 1968 stocker last weekend wth repair parts and a 492 cc kit..
Medical crap is amking me crazy and I can't get to working on them the way I want, did finish new 450 bottom end with NEW trans, have 492cc bored for it, and two high comp heads. tons of head internals plus a 500t bottom, cyls, head. disc brake frame ith front wheels x 2, old mufflers, new sprockets, gasket sets, look thru the pics.
it will be at my cost or slghtly less, with NOS and NLA parts in the white boxes. powder coated pegs, battery box, all sorts of good stufff.
I have a titled 68 with engine , wheels, all other bits x2 r 3, a disc frame and front wheel, new trans ! rebuilt bottom, heads, already bored 492cc cyls pistons head parts galore, al other stuff from wreckers, 500t botttom, head, cyl, basically enough to build tow bikes and then some with NOS stuff left over.
see pics listed under selling or go to
www.brianweir.ca/cafebuilder/ETHTML1.htm
www.brianweir.ca/cafebuilder/ETHTML2.htm
the white boxes have NOS and NLA parts in them. so lets talk but it will not be cheap. Ask Noel, Cooc, or Marco if I was more than fair.
otherwise its ebay today for the cb450 progressives and header pipes which will clean up well.
thanks
brian
brian weir, 41 florence st, kingston, 613-531-7810.
see what you can find in these pics listed below in the thumbnails.
anybody wants to know about the amount of stuff, ask jack cooc and marco who bought the 1968 stocker last weekend wth repair parts and a 492 cc kit..
Medical crap is amking me crazy and I can't get to working on them the way I want, did finish new 450 bottom end with NEW trans, have 492cc bored for it, and two high comp heads. tons of head internals plus a 500t bottom, cyls, head. disc brake frame ith front wheels x 2, old mufflers, new sprockets, gasket sets, look thru the pics.
it will be at my cost or slghtly less, with NOS and NLA parts in the white boxes. powder coated pegs, battery box, all sorts of good stufff.
I have a titled 68 with engine , wheels, all other bits x2 r 3, a disc frame and front wheel, new trans ! rebuilt bottom, heads, already bored 492cc cyls pistons head parts galore, al other stuff from wreckers, 500t botttom, head, cyl, basically enough to build tow bikes and then some with NOS stuff left over.
see pics listed under selling or go to
www.brianweir.ca/cafebuilder/ETHTML1.htm
www.brianweir.ca/cafebuilder/ETHTML2.htm
the white boxes have NOS and NLA parts in them. so lets talk but it will not be cheap. Ask Noel, Cooc, or Marco if I was more than fair.
otherwise its ebay today for the cb450 progressives and header pipes which will clean up well.
thanks
brian
brian weir, 41 florence st, kingston, 613-531-7810.
