ADS
New Member
I have just installed some taper roller bearings in my '74 CB450.
It would appear that now these are installed I am unable to get the top washer on as well as the nut? With the washer in place there is not enough thread for the nut?
Any ideas anyone? The top bearing race sits a mm above the headstock itself.
Cheers Adam.
It would appear that now these are installed I am unable to get the top washer on as well as the nut? With the washer in place there is not enough thread for the nut?
Any ideas anyone? The top bearing race sits a mm above the headstock itself.
Cheers Adam.