cb450 turn signal switch help

[wtskm]

I posted this in the Electrical section and no replies so here goes again.

It seems when I flip it over to make a right hand turn the switch drops out of position, or sticks causing the blinker to stay fully liit or you gotta really lean on it to the right for it to work period.

Anyone out here rebuild the switch, or just pitch it and buy a NOS off the flea bay ?
I was told the internal parts can still be purchased ?

Appreciate any thoughts

thanks

Stan

 

[DUEX EX]

I would take it apart carefully,see if anything looks buggered up,then look for parts if necessary.If all else fails you can find one
on e bay used at least,and learn somthing in the process.