cb750 barnett clutch springs vs oem

[william.objective]

So i've been running with a set of barnett springs and am tired of how stiff they are for everyday riding. I'm thinking about going back to oem springs. I've heard on barnett springs you only seat the retaining nut and dont actually torque it down to stock speck wich i think is around 7foot lbs for my bike. Does anyone have any suggestions?

 

[xb33bsa]

what you are saying about seating and torquing doesn't make any sense the clutch feel, pressure will be exactly the same
go ahead and try stock springs why not ?
but you must torque the screws no matter what springs,only just seating them risks they could come loose
if you have access to a glass bead blaster, blast the steels
if you are worried about or having slippage with the stock springs shim them a bit, a sparkplug washer sometimes does the trick...on some clutches an extra steel plate works