jinsonphoto
Active Member
Hey guys I wanted to see if you all might be able to lend me your expertise. I have a 73 cb750. The bike has been running and in good working order for awhile now. When I first got the bike i went through most of the recommended maintenance stuff and the carbs were an issue. I had to re-jet/clean them and its been running great ever since. Anyways i went to take the bike out yesterday and after right after i started it I noticed fuel pouring out of the #2 carbs nipple. After turning the fuel off it eventually stops pouring out. Im guessing the float may be sticking? However I wanted to get some thoughts from you guys before i dig into them. Pulling the carbs off the first time was a huge pain in the ass and i never replaced the boots so needless to say Im not looking forward to this. If you guys can give me an idea of what to look for or if there is simple way to tackle this task any help would be greatly appreciate.
Thanks in advance!
tony
Thanks in advance!
tony