cb750 master Cyl on a cb360...???

[timdhawk]

can you use a later model front master cylinder (like off a cb750) on a cb360? Do they have any different braking pressures? I want one that has the brake light switch located in the handle so I don't have to use the ugly stock 360 brake switch housing.

 

[mattfeet]

In for answer.

 

[hillsy]

You want an M/C that has the same bore size as your original one.

Outside of that, an M/C is an M/C.

Size is usually stamped on the M/C body somewhere (like 5/8, 7/8, 14, 16, etc).

 

[frogman]

How about something so simple as this?

Its called a banjo bolt brake switch, replaces the one in the end of the MC.

Google or ebay is your friend just have to find the right size.

 

[timdhawk]

How about something so simple as this?

Its called a banjo bolt brake switch, replaces the one in the end of the MC.

Google or ebay is your friend just have to find the right size.

Now THAT is tits! Didn't know they made such a thing... Thanx!

 

[frogman]

;D No prob

 

[MotoMadness]

Now THAT is tits! Didn't know they made such a thing... Thanx!

Yup needed for most aftermarket race master like Brembo and Magura because they all eliminator the rear brake light switch at the hand controls.

Just make sure you get the right thread pitch banjo bolt. 90% of them are M10x1.00 for such masters as the Brembo ones.