cd175 cafe ready to go

supercafe

Coast to Coast
whats up,

i have just recently finished my little cafe.
i have built this thing from frame up. it is an 1973 cd175, this model was only made for 1 year in canada. 1973-74.
frame and motor numbers match, and it only has just over 8000 kms on it.
the motor only has about 250kms on the top end.
i have owned this bike for 1.5 years, and in those yrs i have made some changes to it.
here is a list of what i've done..
1- i installed a sloper tank of a early cd175. and pet cock.
2- used old seat and shaved it down and rewrapped it, added a cafe hump to it.
3- installed a set of cafe bars.
4- installed new exhaust, dunstall type pipes, sounds really awesome.
5- installed new brakes.
6- installed rear sets, works really slick
7- bobbed frt fender, bobbed rear fender with spade cut out..
8- new fork seals and head light.
9- painted all parts, side covers, tank, fenders, spokes, hubs, etc.
10- rebuilt top end. new cam chain/tensioner, new piston rings with cleaned cyl, all new eng gasket kit, new pionts, new plugs,
new carb kit, new starter gear and chain.
11- new drive chain and sprokets.
12- new tires and tubes.
13- painted motor with high temp paint.
14- new regulator.
15- all new bulbs and made up plate and brake light assy, brake light is very bright.

the bike runs very well, recently went on a poker run, and was the smallest bike out of about 200 or so bikes. i ran in the middle
pack and we ran about 85 to 100 kms, and did it with no problems. the bike will do 115kms or so, i do take it on the hyw 401 and
have past a few cars with it. i do'nt tend to do it a lot but it can run it..
any way, the bike sounds and runs perfect. i really don't want to let it go, but my boss says it must go in order to get the next one,
to many toys.
i am looking for 2000$ for this bike cert. or a trade of equal value. i am looking for a bigger bike. perfer a cb350/400 around that
type..it must run and really don't want it in ruff shape..
if interested pm me, i will consider all bike trades......
here are some pics for you.
DSC00445-1.jpg

DSC00446.jpg

DSC00447.jpg

DSC00448.jpg

DSC00449.jpg

DSC00450.jpg


this is a turn key bike, no tire kickers at all, pics are here.
this is a vintage collector bike, and a very strong runner.

the only thing that it needs are exhaust wrap, and the crome tank side covers, i have not found any as of yet, hav'nt tryed that hard.
my insurance is extremly cheap and only takes 5 bucks to fill and can run 90mpg, i have done a 250-500 mile run on 2 tanks.
cost us about 12$ for the run. brockville to ottawa to cornwall to brockville, with running around in ottawa.
any way, if interested pm or post.
thanks,
later.
 
hello,

if there's any one out there with a bike they want to trade, i am willing to talk.
also any offers considered. what to start next project, need room and the money, etc...
it must go!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

all paper work, in order aswell..
later.
 
whats up.

chimbo make an offer,
i am looking to move it along, need room and funds for the next project...
if you have a bike your willing to trade or get rid of, lets see it...all ways interested..
any way, thanks.
later....

and if your between montreal and toronto i will deliver, or meet half way...
let me know..
 
ok, so here's the deal,

i have other projects on the go and ready to more.
so i am asking 1000$ for the bike, or will still trade for 500, 450, 350, 250.
pm me if interested in it..
clean and a very good runner.
thanks
later.
 
Are you looking for 500t project? I'm in VT, so not too close, but am interested...


supercafe said:
ok, so here's the deal,

i have other projects on the go and ready to more.
so i am asking 1000$ for the bike, or will still trade for 500, 450, 350, 250.
pm me if interested in it..
clean and a very good runner.
thanks
later.
 
hey man,

what do you have....
year etc. does it run etc.
and do you have the paper work????

i am looking for a 350 to 500 project..
let me know...
is VT vermont????
i am in brockville ont.
right on the boarder, i am looking at you right now.......(lol).
any way, let me know.....i have a trade lined up with some one from the states right now but
they need to get the paper work, its been acouple of weeks, so im not sure whats going on.
so let me know.....
thanks
later.
 
Pugsley said:
Are you looking for 500t project? I'm in VT, so not too close, but am interested...

Vermont huh? Im down in manchester?? where are you fellow green mountaineer?
 
hey there,

are you in manchester ontario???
or manchester usa.

i am in brockville, in between ottawa and kingston. and 15 mins from the boarder.
any way, later.
 
supercafe said:
hey there,

are you in manchester ontario???
or manchester usa.

i am in brockville, in between ottawa and kingston. and 15 mins from the boarder.
any way, later.

Manchester, Vermont
 
hello all,

the bike has been traded to chavens, on the forum. really sorry to see it gone but wanted a bigger bike. traded for her cb500, not running right now but i just got it and in the same day stripped it. and primed the frame.
will be starting a new post for it soon.
thanks later.
 
Back
Top Bottom