Greenducky55
New Member
Well my name is Donald 24 years old from the area surrounding Fresno ca. Started riding dirtbikes when I was 3 and never really stopped. Always liked to tear things apart and "fix" them as a kid my dad owned an upholstery shop and I always did the year down of seats and ripping old interiors out in highschool. So time went on I got a job making pizza decided to buy my own broken down dirtbike for cheap and fix it up. 94 yz250 was blown up top and bottom so I tore it down cleaned it up and that was my first "build" here's a before and after
So that was that then about a year ago I bought me a 1975 cb750f with a F2 engine from a friend not running mainly due to all the wired had been eaten by dogs and rats so I fixed the wiring got it all going knew I was gonna build a cafe but wanted to make sure it ran before I jumped into appearance items well got her fired up and it just made a crap ton of rattling noise figured it may has been due to carbs being out of sync or out of adjustment valves but it ran. Got everything tuned up but no change so I pulled the motor pulled off the valve cover and well the cam chain had no tension pulled the head and the all the tensioners had just crumbled and well metal all through out the case so I scrapped it. Bought a k1 motor from my buddy and tore it down threw in a 836 kit and a bunch of other goodies and built my cafe before and after of it
So then I bought a k3 cb750 from a friend for 700 and started a digger build that is still going on because well custom choppers are damn expensive if you can't do the major work got a frame built by dalton walker of Split image customs and that's about as far as I've gotten today
Currently building a kz750ltd cafe as well but ya that's my little intro for now
So that was that then about a year ago I bought me a 1975 cb750f with a F2 engine from a friend not running mainly due to all the wired had been eaten by dogs and rats so I fixed the wiring got it all going knew I was gonna build a cafe but wanted to make sure it ran before I jumped into appearance items well got her fired up and it just made a crap ton of rattling noise figured it may has been due to carbs being out of sync or out of adjustment valves but it ran. Got everything tuned up but no change so I pulled the motor pulled off the valve cover and well the cam chain had no tension pulled the head and the all the tensioners had just crumbled and well metal all through out the case so I scrapped it. Bought a k1 motor from my buddy and tore it down threw in a 836 kit and a bunch of other goodies and built my cafe before and after of it
So then I bought a k3 cb750 from a friend for 700 and started a digger build that is still going on because well custom choppers are damn expensive if you can't do the major work got a frame built by dalton walker of Split image customs and that's about as far as I've gotten today
Currently building a kz750ltd cafe as well but ya that's my little intro for now
