CJ360T electrics or modern solution

[cbcafejunkie]

Title says it all, just need everything but harness

 

[JP74]

you can use a regulator/rectifier for a tractor.. i used one on a cb360 and so far so good.. they run about $20-$30.. you can find more info about it on hondatwins forum..

heres the one i used on feebay..
http://www.ebay.com/itm/Regulator-Rectifier-John-Deere-Kohler-AM102596-234279-/290353343603?hash=item439a686c73

 

[cbcafejunkie]

Awesome thanks! I have the wiring harness but nothing else. So this is a good start.

 

[JP74]

no prob.. so far seems like a pretty good upgrade.. replaces the old regulator, and rectifier, with one solid state unit. easy 3 wire hookup.. keeps a reliable consistent charge.

 

[JP74]

that reg/rec unit will have you covered for charging. what else you needing? fuse box and electric starter solenoid? or also lights, controls on bars etc etc?

 

[cbcafejunkie]

that reg/rec unit will have you covered for charging. what else you needing? fuse box and electric starter solenoid? or also lights, controls on bars etc etc?

Looks like I have it all then as it is stock kick only, well except the left bar control. Looking for a cheap solution to that. Also looking to run LED turn signals.

 

[JP74]

i may have a control. prob not off a 360, but others work. ill let you know if i find anything.. as for running LED signals, a electronic flasher from any parts store works great., old standard type ones wont work right with leds..

 

[cbcafejunkie]

i may have a control. prob not off a 360, but others work. ill let you know if i find anything.. as for running LED signals, a electronic flasher from any parts store works great., old standard type ones wont work right with leds..

cant believe I just saw this post. Thanks for the info on the led flasher, that probably saved me on my 750 as well.

As for the control if you do have one that would be awesome, let me know. I'm not looking for a real nice one just something that matches and is functional.

 

[swapdip]

I just took apart a CJ360T, send me a list of what you need and I'll find it and send you a picture

 

[focusinprogress]

I've got a starter solenoid and a left hand bar control panel for the lights/signals/horn....uncut wiring to it as well

 

[cbcafejunkie]

I've got a starter solenoid and a left hand bar control panel for the lights/signals/horn....uncut wiring to it as well

Starter and left hand turn as long as it works I'm up for it. This is a ratbratt build and I'm going as cheap as possible thanks a ton for the help out

 

[cbcafejunkie]

I just took apart a CJ360T, send me a list of what you need and I'll find it and send you a picture

Thanks for your reply I need the rear brake spindle? The part that cams the shoes and connects to the cable pull lever
Maybe the air boxes as well

 

[trek97]

http://www.sparckmoto.com/Products

 

[VonYinzer]

http://www.sparckmoto.com/Products

This ^^^^

 

[focusinprogress]

Starter and left hand turn as long as it works I'm up for it. This is a ratbratt build and I'm going as cheap as possible thanks a ton for the help out

PM me an offer on them.

 

[mechdesign2k4]

i may have a control. prob not off a 360, but others work. ill let you know if i find anything.. as for running LED signals, a electronic flasher from any parts store works great., old standard type ones wont work right with leds..

+1
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_electronic-turn-signal-flasher-tridon-(novita-tech-inc)_5081327-p?searchTerm=flasher

you can get them to work with the old thermal style flashers but it requires a resistor to be put in place. More trouble than its worth.