hello all,
Just trying to figure out an alignment issue I have with my CL360. When I bought it, I immediately noticed this misalignment, but the handle bars were crooked. So I thought there is some misalignment but the handlebars might be throwing me off even more. Anyway, I recently had a chance to rebuild the forks. Put it all back together, and the misalignment was still there. I tightened the top fork nut and kept the bottom one loose, then I loosened the stem bolt, pressed on the bars and put weight on them. I think this is how you're supposed to align them. Not sure.
Whats the correct way or the best way to do this? My forks seemed fine, no bend or anything.
Also the front axle has a small gap between the fork and the hub. I have to really press the forks together in order to have a tight axle. I am guessing this is because of the misaligned triple.
Any input/education/schooling is appreciated!
Thanks guys!
Just trying to figure out an alignment issue I have with my CL360. When I bought it, I immediately noticed this misalignment, but the handle bars were crooked. So I thought there is some misalignment but the handlebars might be throwing me off even more. Anyway, I recently had a chance to rebuild the forks. Put it all back together, and the misalignment was still there. I tightened the top fork nut and kept the bottom one loose, then I loosened the stem bolt, pressed on the bars and put weight on them. I think this is how you're supposed to align them. Not sure.
Whats the correct way or the best way to do this? My forks seemed fine, no bend or anything.
Also the front axle has a small gap between the fork and the hub. I have to really press the forks together in order to have a tight axle. I am guessing this is because of the misaligned triple.
Any input/education/schooling is appreciated!
Thanks guys!