CL360 refusing to start

Alright, thanks. This is also going to be a dumb question. Which cylinder is considered the left? Is it when you are sitting on it or looking at it? Trying to figure out if I am 180 out or not
 
When you're sitting on the bike, it's the one on your left. It's also called cylinder #1, occasionally.
 
Thanks, that is what I thought. I am 180 degrees out now. I swapped the yellow and blue wire to get it correct but I am not sure how it got that way if I did not remove the advancer. It may have been like that before I bought it.
 
Thanks for all your help guys, I just got the bike fired up and running better than before.

Onto the next issue, clutch does not disengage when I pull the lever and shift to first it just dies as if the clutch lever was not ever pulled. I guess it is time to take that apart again and make sure everything is set correctly. Anyone have any advice on common clutch issues.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom