CL450 Pistons

[TheCoffeeGuy]

I am looking for some where to buy pistons, rings, pins and clips for my 1972 CL450 K5. ideally i would like to buy the lot form one place. the bike has 38,000 Kilometers, about 22,000 miles so really would like the 1st over or 2nd oversize. any leads would be a big help. i cannot search the US Honda dealers on line from Canada.

 

[konix]

have you checked charlie's place?

http://www.charlies-place.com/PAGES/Store/store_cb450_piston_kits.html

 

[Flugtechnik]

The only thing still available from Honda are the clips.

Make sure you ask over at hondatwins.net too.

END OF LINE

 

[Rich Ard]

> the bike has 38,000 Kilometers, about 22,000 miles

Have you gauged the cylinders to see if you even need oversize pistons yet?

I have a pair of pins and four clips I can send you for $15 shipped if you'd like them. And I agree with Flug that you should check at HondaTwins - but I expect that your best bet is going to be hitting up eBay.

 

[TheCoffeeGuy]

Thanx for all your help. these are rare. none of the above have any of 1st or 2nd over. 4 th over are available everywhere it seems. my sample bike is no where near that far gone.

 

[Rich Ard]

Wiseco will sell you a set, but they're proud of them.

 

[TheCoffeeGuy]

The Wiseco ones are all .5 over and 1 over. sorta wanted at most .25 over but thanx. Prices were not that out of line, but still they are very proud