Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
How so? It just took a while to get it boiling because I was doing it on a small side burner on my gas grill, so as not to stink up the house. How would that cause a build-up of this hard residue?
Has anyone else that has experience with this method had this happen to their carbs?
How so? It just took a while to get it boiling because I was doing it on a small side burner on my gas grill, so as not to stink up the house. How would that cause a build-up of this hard residue?
Has anyone else that has experience with this method had this happen to their carbs?
oh, i was thinking that you let it boil and then let it sit in the water a while after that, not the other way around. basically acid + water= water crystallization
I diluted the mixture to 1 part juice to 6 parts water as someone earlier in this thread suggested.
Just so you know, that chalky coating has seized up all of my choke mechanisms and I broke one trying to free it up. I'm looking at used replacement carbs at about $150.
I know people say they have had success. But I would not do this again.
yea thats pretty rough.
I am curious to try it, and im going to use it on a parts bike im going to parting out online. So i may experiment with at least one carb see how it works. Yea i read that 1/6th ratio someone mentioned.. maybe ill use a little bit less..
These carbs are in pretty rough shape, bike is pretty well corroded so it would only be an improvement i guess..
I know this is an old thread and my very first post here but I thought it would be a good idea to share my experience since it went really bad.
So I came across this post looking for a good way to clean my CB360 carbs. It seemed to work for everyone but project750. I bought me some lemon juice, put a bottle in a pan with water an brought it to boil. I put one carb body in the mixture for an hour. Get it out and rince and brush it pretty well. Once tried I felt the carb to be rough, like medium sand paper. Tried to oil it with some WD40 but it did nothing.
It was like if the lemon juice had eaten the carb body. It seems that this thing is made of some kind of "concrete" which can me dissolved by the acid contained in the lemon juice. I looked in the pan and there was a big deposit of some fine grey dust (or chalk). It can't be something else than the carb body itslef.
If I ever want to use this carb again I'll have to sand/polish the inside of it to what it was before. Like it is now the slide can't barely move. Moreover, if that kind of dust ever make his way to the engine head, I would not want to see what could happen.
I'm lucky I just bought another CB360 today for parts so I can use his carbs. Maybe I put too much lemon juice in the mix (something like 1/1 ratio), who knows? But I can insure you that I'll never do it again!
There are two main material for carbs, zinc and aluminium.
Zinc reacts different.
Aluminium carbs are a lot lighter and also a lot more expensive, plus, corrode a lot more
I went to the local auto part store this morning and bought the strongest carb cleaner they had. It was 50$ a gallon. I dipped the carb in it for 3 hours than hit it with a tooth brush and super degreaser. It took away most of the rough deposit in and on the carb. I used some 800 grit wet sand paper to soften the slide cavity. Everything seems back to "normal".
If I ever use lemon juice again, I will thin it to 1/6 like someone said before. 1/2 for one hour is way to much.
There are two main material for carbs, zinc and aluminium.
Zinc reacts different.
Aluminium carbs are a lot lighter and also a lot more expensive, plus, corrode a lot more
I have done this to a several carbs and have had mixed results.
It seems like they either go 1 of two ways;
1. they darken up quite a bit and all the crud comes out
2. they turn light grey and get pitted
I have noticed every Mikuni i have put through and most Keihins have been fine, but I have trashed 2 sets of carbs and that is why I just use water now. I suspect these BS38s are high in zinc as they are quite heavy (6lbs) so maybe higher zinc alloys don't corrode as bad. These were boiled in 1/6 lemon juice for 30 min followed by 15 min in plain water, came out real clean. I followed with soda blast, because the carbs do get dark from the bath
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.