My bike is not running, but im doing clutch adjustment. On neutral the wheel is free when i move the wheel by hand and on first and other gear it bites which is good. My problem is when in gear and I pull the clutch lever it still bites and does not disengage the clutch completely, what could be the problem? I tried adjusting the bottom adjuster, turning it in and out, but it didn't do anything. Maybe this is normal, im not sure. Any help is appreciated. thanks
clutch adjustment issues
- Thread starter cactus
- Start date
HerrDeacon
Over 1,000 Posts
What type of bike? Also, even when you pull in the clutch the clutch will still grab a bit, especially with the bike not running and cold oil. It will never move as easy as it does when in neutral.
Its a 1972 honda cb350. I figure it has to do with that, I just don't want the bike going on me when start it up and not able to disengage the rear wheel. I still have to change the oil too. speaking of oil, the oil drain plug is stuck I hope im turning it the right way (lefty loosey righty tighty)? Is that normal too that I can just go through all the gears/neutral without pulling the clutch lever?
