I recently painted my frame. I bought a new gun and the big cup made it hard to get to some of the inside areas. I wound up shooting clear from several different angles. It looked great at first, but now that I look closer, there are areas that have some overspray.
I have never buffed something like a 1" tube before, only panels and tanks.
I have a porter cable buffer. I was thinking of wet sanding starting at 800 and going 1000, 1500, 2000 then using polishing compound.
Any tips / tricks?
Use my hands to hold the paper or should I make something with close to the OD of the tube?
Should I hand polish or try the da buffer?
Sent from my iPad using DO THE TON
I have never buffed something like a 1" tube before, only panels and tanks.
I have a porter cable buffer. I was thinking of wet sanding starting at 800 and going 1000, 1500, 2000 then using polishing compound.
Any tips / tricks?
Use my hands to hold the paper or should I make something with close to the OD of the tube?
Should I hand polish or try the da buffer?
Sent from my iPad using DO THE TON