Common power clean up question

[chopin2323]

So I have actually made a few wiring harnesses before, but I really want to clean the power wiring coming to the front up. I am trying to get rid of all the jumping from connector back to connector back to supply power to them all. I am planning on running HL, TL, blinkers, indicators, key, and main switch for all the lights. Is there a common mini bus that is weather proof available for sell that I just havent found yet? Am I missing another method? Dont really want to put relays in this harness but def open to any idea as I am a lil stuck. Thanks for any input.
Just to say it, this is a cb400t with a cdi ignition.

 

[Sonreir]

I wouldn't worry about finding a weather proof one. Look for something made for marine use and just keep it under the seat.

 

[vandito.cb]

like yay?

or this with individual inline fuses

 

[chopin2323]

Thanks for the replies! I think I am just going to solder all the piggy backing into 1-4 splice and then heat shrink it like this https://www.google.com/search?q=open+barrel+splice+multiple+wires&rlz=1C1AVNG_enUS631US632&espv=2&biw=1517&bih=714&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjVsJvC9sbNAhUFVh4KHYz-BtoQsAQIGw&dpr=0.9#imgrc=Zu2Q8BJpnFV5IM%3A

This way I can just keep it all in line in the harness.

 

[540Nova]

I bundled all my grounds into a Molex connector , and sent them to this bus bar. That's one way to reduce clutter.

Sent from my iPhone using Tapatalk

 

[chopin2323]

Damn. ok I might just have to do that. That is clean.