we usually only run these on brit forums, but heh time to branch out
question...
We were asked to replicate a frame . which we have done in the 4 pics below.
What motorcycle brand and model is it for?
Only 2 answers per person, if no one gets the make and model we will declare the winner the person who gets one or the other, in the event of a tie, we will put them in a hat and let luck decide.
A hint.... We have been making frames for 44 years. And we had to look this one up as not only had we never seen one in the metal, we had'nt even heard of it.
the prize
one of our fibreglass and aluminium seat units, fully upholstered in black with a choice of colour for the piping. (sorry seat pics do not show upholstery.)
our retail price for this unit is £130.00
The seat overall length is 25"
width is 9 7/8" at the front to 10 1/2" where the hump begins. it narrows from that point to the rear.
weight a little over 2 pound.
however we not generous enough to pay for the shipping outside the uk. (sorry).
so that would be down to you.
our seats are made using a combo of glass fibre and aluminium as all aluminium seats with a hump tend to have a weak spot where the hump rises from the seat base and can and often crack there, under race conditions.
the upholstery covers the rivets seen in the pics.
suggestion
if you are 100% certain you know what it is, you can, if you wish pm the answer to me.
i will print those pm's which are correct at the end.
oh which is 7 days from today, by the way.
THE FRAME
THE SEAT
question...
We were asked to replicate a frame . which we have done in the 4 pics below.
What motorcycle brand and model is it for?
Only 2 answers per person, if no one gets the make and model we will declare the winner the person who gets one or the other, in the event of a tie, we will put them in a hat and let luck decide.
A hint.... We have been making frames for 44 years. And we had to look this one up as not only had we never seen one in the metal, we had'nt even heard of it.
the prize
one of our fibreglass and aluminium seat units, fully upholstered in black with a choice of colour for the piping. (sorry seat pics do not show upholstery.)
our retail price for this unit is £130.00
The seat overall length is 25"
width is 9 7/8" at the front to 10 1/2" where the hump begins. it narrows from that point to the rear.
weight a little over 2 pound.
however we not generous enough to pay for the shipping outside the uk. (sorry).
so that would be down to you.
our seats are made using a combo of glass fibre and aluminium as all aluminium seats with a hump tend to have a weak spot where the hump rises from the seat base and can and often crack there, under race conditions.
the upholstery covers the rivets seen in the pics.
suggestion
if you are 100% certain you know what it is, you can, if you wish pm the answer to me.
i will print those pm's which are correct at the end.
oh which is 7 days from today, by the way.
THE FRAME
THE SEAT