copper fuel line

[dixiedevil]

i want to run a copper fuel line on my 76 cb750 and wondering if anyone else has done it?

any quick instructions. I have an idea of how im going to do it but if you have already done it let me know what you did

 

[Ethanol]

i want to run a copper fuel line on my 76 cb750 and wondering if anyone else has done it?

any quick instructions. I have an idea of how im going to do it but if you have already done it let me know what you did

I've been contemplating this for a while. Make sure you have access to a pipe bender, even a small one, or use a bending spring.

Let us know how it works.

 

[verboten1]

You have to put a vibration coil in (basically wind into a spring shape)
If you dont the vibration will work harden copper and it will split

PJ

even then with the vibrations, it will probably still crack eventually

 

[dixiedevil]

well if it cost me $10 bucks every 6 months .... doesnt bother me

 

[dixiedevil]

doh!

 

[rockcitycafe]

if you're going for the look, why not find a copper tube wide enough to fit fuel line into, just make sure it doesn't kink when you bend it... doubly safe that way and you're not stressing the copper