custom exhaust with exhaust fiitings?

[Bobby4Prezz]

hey guys, im posting this up to get some feedback and see what you guys tink. I bought a bunch of different fittings from autozone to get the bends and everything i need for my exhaust one of them will continue straight and the other with bend the same side to have the tips one on top of each other, i will be useing the stock headers, and adding on from where i cut off (right about fromthe foot pegs) i also will be making a custom baffle which has been talked about before here home made copper baffle, then paint the tips black and wrapping the whole exhaust in black header wrap. heres a look at the fittings, let me know what you think. pretty much all the bends would be under the bike so this is what you'd see of the pipes

 

[forcefanajd]

Personally I'd buy some mandrel bends from vibrant, you can get them off summit racing I believe, crush bends just don't belong on any bike for aesthetic reasons mainly.

 

[Bobby4Prezz]

i know its not the "ideal" pipes, but the fact the only the last 3 inches of pipe are exposed and it will all be wrapped, you wont be able to see the bends anyway, i was more curious about "functuality" i guess?

 

[Bobby Joe]

Personally I'd buy some mandrel bends from vibrant, you can get them off summit racing I believe, crush bends just don't belong on any bike for aesthetic reasons mainly.

I was going to say the same thing dude. Or JEGS. the pipe is pretty cheap actually. I deleted the mufflers on my Vette and needed I think a J bend or 2 and 2 straights and it cost me a fun day with my buddy and like $25-50 rather than $125+labor. Good luck

And pics of what you have done so far?