dcc clubmans on a cl360

[XsjadoTwin]

My brother was nice enough to order me some 7/8 DCC clubman bars for Christmas.however when I measured them they are definitely 1" I could send them back or I can make them work. Still debating.

Anyways what do I do with all the wiring inside the stock bars? I mean there's gobs of it (in good condition mind you) but I cannot run the wiring through these clubman's. What are some tips tricks for hiding all these wires?

 

[SONICJK]

Send them back.
You need new risers and all new controls, new throttle etc.
much much easier to exchange.

 

[Reinhard]

They're not wrong you are

 

[Reinhard]

Your bars are 7/8. Don't measure with a tape.use calipers

 

[XsjadoTwin]

Your bars are 7/8. Don't measure with a tape.use calipers

Thanks, and I did measure these with digital calipers. Not sure where you came up with using a tape measure... The work order lists 7/8" DCC clubman bars. These are 1" bars.