rockcitycafe
I make things.
Re: Deacon's 1972 CB350 Cafe Project
grab some wd-40 in a can and a brush, when you mark out your cut lines, brush them with wd-40 before you saw through the material, keep the cutting area wet with the wd-40 and you won't destroy any blades.
HerrDeacon said:Yes, only very basic tools. Only thing I really have is a drill press. I even have to borrow my dad's jigsaw . Should be interesting, hopefully it turns out ok. I'll post the progress.
grab some wd-40 in a can and a brush, when you mark out your cut lines, brush them with wd-40 before you saw through the material, keep the cutting area wet with the wd-40 and you won't destroy any blades.