Hey guys, I'm a new member and this is my first post on do the ton. I bought a Yamaha XS360 few months ago from a friend who had it sitting for a year or more and the bike doesn't have a spark at all. I ran some diagnostic that i might cause the spark plugs not to spark and i still didn't figure out the problem yet. things i did are:
-Replaced the coils
-Replaced spark plugs
-Replaced spark plug caps
-Adjusted the contact point gaps
-All fuses are fine and tested
-Battery is brand new
-Kill switch is tested and work properly
Everything seems to be fine except there's no spark, i thought it could be the ignition condenser but i checked the contact points for a volt with a voltmeter and it was reading around 90 volts. Main things that i'm confused about now is that on the first key switch the spark plug caps read 90 but on the second key switch it doesnt read anything, but on the first key switch with contact points its doesnt read anything but on the second switch it reads 90 shouldn't the first switch read 90 for both contact points and spark plug caps? help is appreciated.
-Replaced the coils
-Replaced spark plugs
-Replaced spark plug caps
-Adjusted the contact point gaps
-All fuses are fine and tested
-Battery is brand new
-Kill switch is tested and work properly
Everything seems to be fine except there's no spark, i thought it could be the ignition condenser but i checked the contact points for a volt with a voltmeter and it was reading around 90 volts. Main things that i'm confused about now is that on the first key switch the spark plug caps read 90 but on the second key switch it doesnt read anything, but on the first key switch with contact points its doesnt read anything but on the second switch it reads 90 shouldn't the first switch read 90 for both contact points and spark plug caps? help is appreciated.