Discontinued Oil Seal

Not sure what part it is (your link just goes to the main fiche and i cant find it), BUT if its the seal im thinking of (behind the front sprocket, a round rubber seal with a hole punched out for the shaft), just get some permatex gasket maker and run it around the outside of the rubber peice, and pop it back in. It will seal up fine.
 
Get inside and outside diameter measurements and call any big bearing company.
SKF, CBC etc.

The depth isn't that critical.


Cheers.
 
jimid said:
Have some oil dripping out the seal for the transmission behind the the front sprocket.

Tried bike bandit and the local shops here in RI. Nobody has is it. Anyone have any clues on where to pick one up?
Maybe there is something generic that would work?

Seal number 25:
http://www.bikebandit.com/houseofmotorcycles/honda-motorcycle-cb200t-1975/o/m9219
Click to expand...

Do a Google search with just the part number. You'll find a lot of one off websites that will sell them rather than bikebandit. Sometimes you may have to call. I believe the part you are looking for is "91201-216-005" I also searched that part number on ebay and two seals came up for dirt cheap. Just double check them.

P.S. Use Babbits website for diagrams and parts. They are better and a little cheaper.
 
Thanks for the help, three different solutions in an hour. Cant beat that.

Yes. 91201-216-005 is the part number I'm looking for. Always hated how bike bandit had there own number system.

Got the NOS one from ebay. Ill keep permatex in mind in case nothing is truly available.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom