Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
15" shocks were getting the desired lift, I was hoping to drop that to 14" and get the extra 1" from lifting the subframe.
Chain rub wasn't the major concern as I could fabricate a chain tensioner for the swingarm, I was more worried about the funny handling as I have an USD fork conversion in the planning stages too.
Checking out the beginning of this thread it's fair to say this build has evolved. There are a number of different bikes on the net that are influencing my bike and I thought I would share them here and provide the links/names of builders where possible:
Squirleys 550 Cafe Build
GoingsMoto's 550
And an out there part build from RustyOlive, the insane Fat Arse 550 ( why are they all 550's!!!!!)
Good day in the shed today. Committed to the monoshock by cutting off the upper shock mounts. Much tidier now with clean tube, my seat was very tight going over the brackets for the mounts, now it just glides on:
Finished off the seat by drilling the mounting holes and cut off the old rear tank rubber mounts:
Got to cutting the uprights for my swingarm brace and a rough test fit courtesy of some masking tape to hold it all together:
I think I need another bend in there as the straight sections need bracing too but I think there is going to be chain clearance issues. Should be fixed with a straight insert at the very top and 2 bends half way down the straight sections.
Put all the bits back on so I can put it to bed for another night:
Finished up with a good clean of the bench:
Also did a bit more on the tank however I am having real issues getting the solder to stick to the new panels. Going to talk to a radiator man about doing it for me and pressure testing it. It's ready to go now though as I've tidied up all the visible sections.
Looking good! Hope you got the missus vacuum back in the house before she noticed lol...... Interested to see how the mono turns out. What are you going to do with the cut outs in the tank to fit the frame? Rounding them out?
It's actually my shop vac, the old house one as we bought a Dyson so no issues there.
Plan for the tank cutouts is to round them out at a minimum or I may be trimming those sections to meet the lines of the seat. Haven't decided quite yet as I may be lifting the subframe an inch. Need to get the mono done and wheels on to test fit.
From the land of Spandau Ballet, 2 individuals team up (admittedly 1 doing the thinking and work, the other chirping in with suggestions) from actoss the globe, to build a golden gorgeous front end.
The donor:
Stem comparison (Gixer v 360), needs top bearing area reduced and new threads cut:
Reduced:
Beefiness comparison vs 360:
Looks like there might be tank clearance issues so will need to either reduce the steering stops, cut the tank more with scoops or as a last resort look at custom triples.
Test fit:
Lastly need to sort some carriers to place the calipers in the right place:
Was in the local hardware store yesterday too and saw this stuff. I assume this is the recommended product for painting the frame?
2 pieces of 3"diameter exhaust pipe fitted into front of tank
1ft should be plenty, split down the middle to get 2 curved pieces
With all the old Holden's around scrap pipe should be real easy to pick up
I'm a precision machinist, modifying stem is far easier ;D
The correct bearings are available all over, including Honda
You don't have to mix and match odd stuff which may or may not have same pressure angles
I'm pretty sure a modified 400F won't be able to stress front end as much as a GSX-R 600/750
Take a look at Yamaha DT125~175 mono-shock from the 80's (should be able to find one)
They had fabricated swing arm similar to what your doing.
The curved section at rear looks good and is probably plenty strong enough but it would force stresses to change direction, straight lines and triangles are your friend if your not a structural engineer ;D
Your top loop design is just fine,but it needs to be copied in one continuous piece of tubing(easy Y'v got a pattern handy then.....).A stressed member should not be cut'n'shut sections.Every frame tube flexes and "walks around"and numerous welds are just stress risers you don't need.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.